SRM: 7x Spare QR2 Base side with 70mm Mount

This product is a base side of the QR2 quick release with a 70mm hole pattern mounting.

The product is in high quality Aluminium and Black anodised for a superb finish.

• No cable or female pins are included with this part.
• Includes 6 x M5 16mm Black CAP head bolts.

This part has a hole through the centre so wires can be passed through. 

There are 5 threaded M4 holes to mount a pin plug housing - but this should be custom made as there is no off the shelf part for this unless you buy the part for SRM's Base side conversion kit or the shaft extension.  On these parts SRM makes a custom female pin plug.

Disclaimer: 

SRM worked really hard to ensure fine tolerances on these QR's and when tested at SRM, no play was observed.  Some customers have reported minor play while others say they are absolutely fine.  SRM has done its best with these and ask you to accept them "as they are".  Please only order if you are prepared to accept that there might be a tiny bit of play for some.