Tools Required
· Philips Head Precision Screw Driver (size: PH0)
· Tweezers
Installing Your Grips (part 1)
· Using tweezers, carefully peel off the
yellow covering on the self-adhesive pad.
· Do this for all four grip halves.
Installing Your Grips (part 2)
Installing Your Grips (part 2)
· Attach the grip halves to the wheel plate using
the No.2 (2.2mm x 13mm long) Self Tapping
Posi Pan Head Screws provided.
· When screwing the new grips together, make
sure the rear grips are seated into position
properly. If they are not and you try to screw
the top half on, you may damage the holes
that receive the self-tapping screws.
· DO NOT OVER TIGHTEN THE SCREWS!
Tighten the screw until you see the two grip
halves come together and you feel an
obvious “stop” feeling resistance. If you over
tighten, there is a risk of stripping the holes.
***VERY IMPORTANT, PLEASE READ CAREFULLY***
We do not charge VAT on any of our products. Below is further information:
(1) UK Customers do not pay VAT.
(2) USA Customers now pay 10% import tariff.
(3) EU & THE REST OF THE WORLD Customers pay VAT and admin fee in their own country.
Please check your country specific import fees and make sure you understand this BEFORE placing an order.